Solar Hollow Mid Clamp for PV Panel

This Solar Hollow Mid Clamp for PV Panel product from Egret Solar uses 6000-T5 high-quality aluminum alloy as the material. The surface has undergone an anodizing treatment, making it corrosion-resistant and suitable for complex environments such as coastal areas and high-humidity conditions. It is specifically designed to fit 30 or 35mm thickness photovoltaic modules, with the opening size precisely measured to the millimeter level. The clamping is stable and does not shift. The overall structure is not complex, has sufficient strength, is easy to install, and the torque control is more uniform. It can be used for both rooftop projects and ground racks, is compatible with mainstream framed modules, and the system design is convenient.

PRODUCT SHOW

This combination of Solar Anodized Hollow Clamp , rail, and L-foot forms a complete installation system. The mid clamp is specifically used to hold down the two adjacent components, the rail serves as the support at the bottom, and the L-foot is responsible for fixing the entire frame to the roof or the ground. The three components work together, providing a stable overall structure. It's easy to adjust the position during on-site installation. The structure is not complex, and the thickness of common components available on the market can be used. It is suitable for both roof and ground projects.

Installation Process

Place the two solar panel side by side on the rail, aligning them properly. Take the Universal Aluminum Solar Mid Clamp and slide it in from the side, right into the gap between the two module frames. Push the bolts through the clamp holes and down into the rail slots. Use a torque wrench to tighten the clamp — make sure it's even, not tight on one side and loose on the other. Do the same for every module. And at the end, don't forget the end clamps on the outer edge of each row. They hold the edge modules in place too.

ADVANTAGES

1.The accessories are per-assembled and locked before leaving the factory. At the site, they can be directly assembled. This eliminates the need for on-site sorting, aligning holes, and searching for screws, thereby reducing the risks of missing or losing components.

2.The mainstream thickness components available on the market can generally be matched. Solar panels of different power and different frame sizes have corresponding specifications to choose from.

3.This Solar Hollow Mid Clamp is directly shipped from the factory warehouse and offers extremely high value for money.

OUR EXHIBITION

Egret Solar regularly exhibits at solar trade shows. We've been to events in China, Southeast Asia, the Middle East, and Europe. We show up where our customers are. During the exhibitions, the company not only showcases mainstream mounting accessory products (PV Module Mid Clamp, rail,hook), but also conveys its understanding of each aspect of the photovoltaic installation system through on-site explanations and physical demonstrations. The team members possess solid product knowledge and project experience, and can effectively communicate with visiting customers on issues such as system matching, installation techniques, and material standards. This face-to-face, professional communication method significantly improves the accuracy of information transmission and the efficiency of converting cooperation intentions.

FAQ

Q1: Can this clamp be adapted to the common rails available on the market?

A:Not all of them can be applied. Please send the cross-sectional diagram of the rail over. We will help you check it.

Q2: Is the Hollow Design Solar Clamp of poor quality?

A: No. Hollow design is used to reduce weight while ensuring the strength of the structure. The structure has undergone force testing, and because of its lightness, it is much easier to handle and install.

Q3: The thickness of the component frames of different brands varies. Can they be used interchangeably?

A:The clamping opening range of this clamp is designed relatively wide, and most regular component frames can be inserted. If the frame is too thick or too thin, corresponding specifications are available for selection.