Solar Earting Component

Solar earting component is the process of discharging electric power into the earth via a wire for protection and functionality. Solar earting component is also referred to as a grounding system or electrical work that connects electronic wiring to the ground for lightning protection, personal safety, property protection, prospective grading earthing, and so on.

In order to ensure the solar photovoltaic system is grounded, Egret Solar specially designed mid/end clamp grounding clamps have sharp points on the four corners to break the anodized film on the rail and solar panel frame, making the panel and mounting rail a conductive circle . In addition, the two rails and the grounding piece that fixes the copper wire connect the rails of different rows, turning the entire solar photovoltaic system into a conductive system. Finally through the copper wire winding system.

In solar photovoltaic systems, solar panels are often installed in high, exposed locations and are vulnerable to induced surges caused by nearby lightning strikes. Utility interactive inverters can also be affected by surges on utility power lines. Additionally, systems that use photovoltaic power to run computers with hardwired modems are vulnerable to surges on telephone lines. Install the solar earthing component for solar mounting system is necessary, the proper grounding can effectively reduce these potential problems.

Solar Earthing Component play an important role in the solar mounting system, protect the solar mounting work well with safe and reliable.The Special teeth on the solar panel ground clip can be embedded in the anodized aluminum and create an airtight electrical connection. To obtain the connection of the lowest rail, the gasket is made of thin stainless steel. The ground clip has four holes and four feet, and it fits nicely on the aluminum rail, piercing the oxide layer of the aluminum rail.

Solar earthing component is designed for ground able solar mount system accessories. Photovoltaic grounding clips are essential during storms and thunderstorms to prevent damage to solar panels. It is fixed between the photovoltaic module and the aluminum rail as a ground conductor. Suitable for long-term outdoor use.

Egret Solar design specially Solar earthing component to ground the solar system up to ensure the systems safety. The common earthing component including : Grounding Lug,grounding washer/grounding clips, bonding jumper.cable clips.